KNX auto.ctrl.sw. Komfort 1.10 m Gira E22 stainless steel(lacquered)
GIRA 130420

KNX auto.ctrl.sw. Komfort 1.10 m Gira E22 stainless steel(lacquered)

Product code: 130420
Passive infrared motion detector for indoor areas. Upon triggering by a movement of heat, a switching command is sent. Designed to be mounted at switch height- 1.1m
Price (Excluding GST)


The properties can be configured.

  • Can be set as individual device, main unit, auxiliary unit.
  • Switching of operating mode between illumination and signal mode (signal mode: A specific number of movements must be detected in a specified time interval before a telegram is sent)
  • Additional switching object in signal mode
  • Behaviour upon switching to signal mode can be configured
  • In illumination mode, the functions switching, value transmitter and light scene execution can be set.
  • Brightness-independent motion detection can be set
  • Behaviour after bus voltage recovery can be set
  • Status LED
  • Go-test function for checking of the reception area (brightness independent)
  • Alarm function for removal of top unit automatic control switch
  • Resetting of alarm object upon replacement of the top unit
  • Telegram type at beginning and end of reception can be set
  • Cyclical transmission
  • Block function can be configured for the beginning and end of blocking (own communication object)
  • The brightness value can be set (lockable via ETS) within the limits set in the ETS (3 - 100 lux) via the built-in potentiometer
  • Sensitivity can be set via potentiometer
  • Additional delay time can be set via potentiometer
  • Switchable to continuous-on, continuous-off or automatic mode via slide switch (blockable via ETS) 

Technical Details


  • Bus Voltage: KNX Bus 21...30VDC
  • Bus Current Consumption: 5mA
  • Installation Height: 1.1m
  • Detection Angle: 180°
  • Motion Detection Range at 1.1m Mounting Height: 6m in the front, 3m on each side 
  • Uses 0570 00 Bus Coupler



Technology KNX
Technology KNX
Design range GIRA System 55
Insert finish E22 Stainless Steel
Mounting Flush
Back Box Round European
Input voltage KNX Bus (29VDC)
Buscoupler Not Included
IP rating IP20
EAN 4010337304203

Documents & Downloads

Look for similar items